Selecting stitches is easy with just the press of a button.
The buttons are large, making operation intuitive, and the stitch numbers and recommended presser foot are printed, making it user-friendly.
The selected stitch is indicated by an LED light.

The needle threader stops once in the lowered position, making it easy to operate and allowing you to thread the needle quickly.

The workspace width is 170mm. For bigger projects included is a large extension table, when fitted to the machine it substantially increases your work area.

No need to bring the bobbin thread up through the needle plate to start sewing. Simply place bobbin in bobbin case, run thread through the tension spring, left around the easy thread bobbin slot and trim off the thread tail on the built-in cutter. Thread the top thread and you are ready to sew.

Easily wind bobbins using the bobbin winder with plate and cutting blade.

You can see at a glance which stitch and presser foot are currently selected, along with the settings.

To cut the threads automatically after locking stitches, press the thread cutter memory key.

Some of the utility stitches and decorative stitches can be sewn with a twin needle.

Stitch elongation on satin stitches allows the stitch pattern to be elongated of up to 5 times the default stitch length.

Equipped with 3 ultra bright LED lamps offer shadow-free sewing.