Setting machine for top cover stitch is so quick. The top cover stitch guide and spreader are built-in. Using one finger, simply push down the built-in top cover stitch guide and spreader into position. When finished, simply press the lever to retract and store away.

It’s so easy to sew fine weight fabrics. Switch the lever to FINE, machine adjusts ready to stitch light weight fine knits or light weight woven fabrics. Use the STD setting for stitching standard to heavier knit fabrics/woven fabrics.

3 needles to thread, use the built-in needle threader, it’s easy to use and a time saver. Select the needle for threading by simply sliding the needle threader switch lever to R/M/L (right needle, middle needle, left needle), then push down on the needle threader lever and thread needle. You’ll be ready to sew in no time.

Top cover stitch and triple cover stitch can chain-off to finish, similar thread chain-off as an overlocker. Depending on the sewing project, finishing options are pulling the needle threads, trim them then pull out behind the needle plate or chain-off leaving a chained thread tail.

Free-arm work-area can be used for hemming sleeves, necklines, trousers, leggings or any small project.

LED Lighting in 3 locations, includes the retractable sewing light, which pulls out to illuminate the needle area.
The retractable sewing light is an inherited feature from our high-end professional sewing machines. The additional retractable lighting allows you to easily sew at anytime.